Performance Data Sheet For Brita™ Faucet Mount System (models FF-100, SAFF-100) with Brita™ Faucet Mount Replacement Filter (Model FR-200)

IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs.

It is recommended that, before purchasing a water treatment unit, you have your water supply tested to determine your actual water treatment needs.

Brita™ Faucet System Reduction Data & NSF/ANSI Standard Requirements

Substance	Overall Percent Reduction	Influent Challenge Concentration	U.S. EPA Level*/NSF Maximum Permissible Product Water Concentration	Health Canada Guideline
NSF/ANSI Standard 42 – Aesthetic Effects
Chlorine	99.0	2ppm ± 10%	≥ 50% reduction	N/A
Nominal Particulate Class 1(0.5–1.0 μm) claim with a 99.9% overall percent reduction	99.9	at least 10,000 particles/mL	≥ 85% reduction	N/A
NSF/ANSI Standard 53 – Health Effects
Unit	%	mg/L	mg/L
Lead pH 8.5	99.9	0.15 ± 10%	0.005	0.005
Lead pH 6.5	99.9	0.15 ± 10%	0.005	0.005
Asbestos	99.9	10⁷ to 10⁸ fibers/L; fibers greater than 10 μm in length	≥ 99% reduction	N/A
Chlordane	99.5	0.04 ± 10%	0.002	N/A
Toxaphene	95.2	0.015 ± 10%	0.003	N/A
VOC	99.8	0.45 ± 20%	0.08	N/A
NSF/ANSI Standard 53 - Health Effects Volatile Organic Chemicals (VOCs) Included by Surrogate Testing
Unit	%	mg/L	mg/L
Alachlor	99.8	0.05	0.001	N/A
Atrazine	99.8	0.1	0.003	0.005
Benzene	99.8	0.081	0.001	0.005
Carbofuran	99.8	0.19	0.001	N/A
Carbon Tetrachloride	99.8	0.078	0.0018	0.002
Chlorobenzene	99.8	0.077	0.001	N/A
Chloropicrin	99.8	0.015	0.0002	N/A
2,4-D	99.8	0.11	0.0017	N/A
Dibromochloropropane (DBCP)	99.8	0.052	0.00002	N/A
𝑜-dichlorobenzene	99.8	0.08	0.001	N/A
𝑝-dichlorobenzene	99.8	0.04	0.001	0.005
1,2-dichloroethane	99.8	0.088	0.0048	0.005
1,1-dichloroethylene	99.8	0.083	0.001	0.014
𝑐𝑖𝑠-1,2-dichloroethylene	99.8	0.17	0.0005	N/A
𝑡𝑟𝑎𝑛𝑠-1,2-dichloroethylene	99.8	0.086	0.001	N/A
1,2-dichloropropane	99.8	0.08	0.001	N/A
𝑐𝑖𝑠-1,3-dichloropropylene	99.8	0.079	0.001	N/A
Dinoseb	99.8	0.17	0.0002	N/A
Endrin	99.8	0.053	0.00059	N/A
Ethylbenzene	99.8	0.088	0.001	0.014
Ethylene Dibromide (EDB)	99.8	0.044	0.00002	N/A
Haloacetonitriles (HAN) [includes]
Bromochloroacetonitrile	99.8	0.022	0.0005	N/A
Dibromoacetonitrile	99.8	0.024	0.0006	N/A
Dichloroacetonitrile	99.8	0.0096	0.0002	N/A
Trichloroacetonitrile	99.8	0.015	0.0003	N/A
Haloketones (HK) [includes]
1,1-Dichloro-2-propanone	99.8	0.0072	0.0001	N/A
1,1,1-Trichloro-2-propanone	99.8	0.0082	0.0003	N/A
Heptachlor	99.8	0.025	0.00001	N/A
Heptachlor Epoxide	99.8	0.0107	0.0002	N/A
Hexachlorobutadiene	99.8	0.044	0.001	N/A
Hexachlorocyclopentadiene	99.8	0.06	0.000002	N/A
Lindane	99.8	0.055	0.00001	N/A
Methoxychlor	99.8	0.05	0.0001	N/A
Pentachlorophenol	99.8	0.096	0.001	N/A
Simazine	99.8	0.12	0.004	N/A
Styrene	99.8	0.15	0.0005	N/A
1,1,2,2-Tetrachloroethane	99.8	0.081	0.001	N/A
Tetrachloroethylene	99.8	0.081	0.001	0.01
Toluene	99.8	0.078	0.001	0.06
2,4,5-TP (silvex)	99.8	0.27	0.0016	N/A
Tribromoacetic acid	99.8	0.042	0.001	N/A
1,2,4-Trichlorobenzene	99.8	0.16	0.0005	N/A
1,1,1-Trichloroethane	99.8	0.084	0.0046	N/A
1,1,2-Trichloroethane	99.8	0.15	0.0005	N/A
Trichloroethylene	99.8	0.18	0.001	0.005
Trihalomethanes [includes]				0.1
Chloroform (Surrogate Chemical)	99.8	0.3	0.015	N/A
Bromoform	99.8	0.3	0.015	N/A
Bromodichloromethane	99.8	0.3	0.015	N/A
Chlorodibromomethane	99.8	0.3	0.015	N/A
Xylenes (total)	99.8	0.07	0.001	0.09
NSF/ANSI Standard 401 - Emerging Compounds/Incidental Contaminants
Unit	%	ng/L	ng/L
Phenytoin	94.3	200 ± 20%	30	N/A
Ibuprophen	94.6	400 ± 20%	60	N/A
Naproxen	96.4	140 ± 20%	20	N/A
Estrone	96.4	140 ± 20%	20	N/A
Bisphenol A	94.7	2,000 ± 20%	300	N/A
Nonylphenol	91.4	1,400 ± 20%	200	N/A
Microplastics, particles 0.5-1 μm	99.9	at least 10,000 particles/mL	≥ 85% reduction	N/A

The Brita Hub™ Filter (Model #CT01)has been certified by WQA against NSF/ANSI Standards 42, 53 and 401 for the reduction of contaminants in system models as specified on the Performance Data Sheet.

This system has been tested according to NSF/ANSI Standards 42, 53 and 401 for reduction of the substances listed. The concentration of each of the indicated substances in water entering the systems was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53 and 401.

System tested at 60 psig (414 kPa) using a minimum flow rate of 0.58 gpm (2.19 L/min).

Testing was performed under standard laboratory conditions. The contaminants or other substances removed or reduced by this water treatment system are not necessarily in all users’ water. Filter performance may vary based on local water conditions. The compounds certified under NSF/ANSI 401 have been deemed as “incidental contaminants/emerging compounds.” Incidental contaminants are those compounds that have been detected in drinking water supplies at trace levels. While occurring at only trace levels, these compounds can affect the public acceptance/perception of drinking water quality.

The Brita™ Faucet Filtration System is not intended to purify water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Individuals requiring water of special microbiological purity should follow the advice of their doctor or local health officials regarding the use and consumption of their tap water and Brita™ filtered water.

Specifications for the Brita™ Faucet Mount System (models FF-100, SAFF-100) with Brita™ Faucet Mount Replacement Filter (Model FR-200)

Capacity: 100 gallons (378 liters)

Service Flow Rate: 0.58 gpm (2.19 L/min)

Working Pressures (min./max.): 20 psig/100 psig (138 kPa/689 kPa)(1.4 kg/cm2/7.0 kg/cm2)

Filtered Water Temperature (min./max.): 34°F/100°F (1°C/38°C)

Electrical Requirements: None

Please refer to the User Guide for the proper installation, conditioning, use and care requirements, and an explanation of how the filter replacement indicator functions. Maintenance according to the manufacturer’s instructions is essential for proper filter performance. Filter life should not exceed 100 gallons. If a decrease in flow rate is noticed, replace the filter earlier. Replacement filters (model FR-200) are available in one-pack, two-pack and three-pack sizes in the U.S. Replacement filters are available in one-packs in Canada. For more information, visit brita.com (USA) or brita.ca (Canada).

Distributed in U.S.A. for: Brita LP, 1221 Broadway, Oakland, CA 94612; 1-800-242-7482

Distributed in Canada by: Brita Canada Corporation, 150 Biscayne Crescent, Brampton, ON L6W 4V3; 1-800-387-6940

View PDF