The Clorox CompanyFamily of Brands
Never miss a change with filter change reminders. Learn More.

Performance Data Sheet For Brita Hub™ System (Model Numbers 87340, 87340C, 87341, 87341C, 87344 AND 87344C)

For System Model Numbers 87340, 87340C, 87341, 87341C, 87344 and 87344C, and Replacement Filter Model CT01.

IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs. It is recommended that, before purchasing a water treatment unit, you have your water supply tested to determine your actual water treatment needs.

This system has been tested according to NSF/ANSI 42, 401 and 53 for reduction of the substances listed. The concentration of each of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the systems, as specified in NSF/ANSI 42, 401 and 53.

Brita Hub™ System Reduction Data & NSF/ANSI Standard Requirements

SubstanceOverall Percent ReductionInfluent Challenge ConcentrationU.S. EPA Level*/NSF Maximum Permissible Product Water ConcentrationHealth Canada Guideline
NSF/ANSI Standard 42 – Aesthetic Effects*
chloramine¹96.7%3.0 ± 0.3 ppm80%²N/A
chlorine98.7%2.0 ± 0.2 ppm50%²N/A
particulate reduction(class I)99.9%>10,000 particles/mL85%²N/A
NSF/ANSI Standard 401 – Emerging Compounds/Incidental Contaminants*
atenolol96.4%200 ± 40 ppt30 pptN/A
bisphenol A94.6%2000 ± 400 ppt300 pptN/A
carbamazepine97.5%1400 ± 280 ppt200 pptN/A
DEET (diethyltoluamide)96.4%1400 ± 280 ppt200 pptN/A
estrone96.4%140 ± 28 ppt20 pptN/A
ibuprofen95.5%400 ± 80 ppt60 pptN/A
linuron94.8%140 ± 28 ppt20 pptN/A
meprobamate96.2%400 ± 80 ppt60 pptN/A
metolachlor96.5%1400 ± 280 ppt200 pptN/A
naproxen95.9%140 ± 28 ppt20 pptN/A
nonylphenol91.9%1400 ± 280 ppt200 pptN/A
phenytoin96.5%200 ± 40 ppt30 pptN/A
TCEP (tris(2-chloroethyl) phosphate)96.3%5000 ± 1000 ppt700 pptN/A
TCPP (tris(1-chloro-2 -propyl)phosphate)92.2%5000 ± 1000 ppt700 pptN/A
trimethoprim97.1%140 ± 28 ppt20 pptN/A
microplastics, particles 0.5 to <1 μm99.9%>10,000 particles/mL85%²N/A
NSF/ANSI Standard 53 – Health Effects
lead pH 6.5*99.8%150 ± 15 ppb5 ppb5 ppbª˒ᵇ
lead pH 8.5*99.8%150 ± 15 ppb5 ppb5 ppbª˒ᵇ
mercury pH 6.5*96.5%6 ± 0.6 ppb2 ppb1 ppbª
mercury pH 8.5*96.4%6 ± 0.6 ppb2 ppb1 ppbª
NSF/ANSI Standard 53 - Health Effects Volatile Organic Chemicals (VOCs) Included by Surrogate Testing†˒³
alachlor>98%50 ppb1 ppbN/A
atrazine>97%100 ppb3 ppb5 ppbª
benzene>99%81 ppb1 ppb5 ppbª
carbofuran>99%190 ppb1 ppbN/A
carbon tetrachloride98%78 ppb1.8 ppb2 ppbª
chlorobenzene>99%77 ppb1 ppbN/A
chloropicrin99%15 ppb0.2 ppbN/A
2,4-D98%110 ppb1.7 ppb100 ppbª
dibromochloropropane (DBCP)>99%52 ppb0.02 ppbN/A
o-dichlorobenzene>99%80 ppb1 ppbN/A
p-dichlorobenzene>98%40 ppb1 ppb5 ppbª/≤1 ppbᶜ
1,2-dichloroethane⁴95%⁴88 ppb4.8 ppb5 ppbª
1,1-dichloroethylene>99%83 ppb1 ppb14 ppbª
cis-1,2-dichloroethylene>99%170 ppb0.5 ppbN/A
trans-1,2-dichloroethylene>99%86 ppb1 ppbN/A
1,2-dichloropropane>99%80 ppb1 ppbN/A
cis-1,3-dichloropropylene>99%79 ppb1 ppbN/A
dinoseb99%170 ppb0.2 ppbN/A
endrin99%53 ppb0.59 ppbN/A
ethylbenzene>99%88 ppb1 ppb140 ppbª/1.6 ppbᶜ
ethylene dibromide (EDB)>99%44 ppb0.02 ppbN/A
haloacetonitriles (HAN)
bromochloroacetonitrile98%22 ppb0.05 ppbN/A
dibromoacetonitrile98%24 ppb0.6 ppbN/A
dichloroacetonitrile98%9.6 ppb0.2 ppbN/A
trichloroacetonitrile98%15 ppb0.03 ppbN/A
haloketones (HK)
1,1-dichloro-2-propanone99%7.2 ppb0.1 ppbN/A
1,1,1-trichloro-2-propanone96%8.2 ppb0.3 ppbN/A
heptachlor>99%25 ppb0.01 ppbN/A
heptachlor epoxide98%10.7 ppb0.2 ppbN/A
hexachlorobutadiene>98%44 ppb1 ppbN/A
hexachlorocyclopentadiene>99%60 ppb0.002 ppbN/A
lindane>99%55 ppb0.01 ppbN/A
methoxychlor>99%50 ppb0.01 ppbN/A
pentachlorophenol>99%96 ppb1 ppb60 ppbª/≤30 ppbᶜ
simazine>97%120 ppb4 ppbN/A
styrene>99%150 ppb0.5 ppbN/A
1,1,2,2-tetrachloroethane>99%81 ppb1 ppbN/A
tetrachloroethylene>99%81 ppb1 ppb10 ppbª
toluene>99%78 ppb1 ppb60 ppbª/24 ppbᶜ
2,4,5-TP (silvex)>99%270 ppb1.6 ppbN/A
tribromoacetic acid>98%42 ppb1 ppbN/A
1,2,4-trichlorobenzene>99%160 ppb0.5 ppbN/A
1,1,1-trichloroethane95%84 ppb4.6 ppbN/A
1,1,2-trichloroethane>99%150 ppb0.5 ppbN/A
trichloroethylene>99%180 ppb1 ppb5 ppbª
trihalomethanes (THMs), includes
chloroform (surrogate chemical), bromoform, bromodichloromethane, chlorodibromomethane95%300 ppb15 ppb100 ppbª
Xylenes (total)>99%70 ppb1 ppb90 ppbª/20 ppbᶜ

1 As monochloramine (measured as Cl2/L)

2 NSF Minimum Percent Reduction Requirement

3 Chloroform was used as the surrogate chemical for VOC reduction claims

4 Chemical reduction percent and maximum product water level calculated at chloroform 95% breakthrough point as determined in surrogate qualification testing

a Health Canada Maximum Acceptable Concentration (MAC)

b Health Canada As Low As Reasonably Achievable (ALARA)

c Health Canada Aesthetic Objective (AO)

*Certified by WQA

† Certified by IAPMO

N/A = Not Applicable

The compounds certified under NSF/ANSI 401 have been deemed as “incidental contaminants/emerging compounds.” Incidental contaminants are those compounds that have been detected in drinking water supplies at trace levels. While occurring at only trace levels, these compounds can affect the public acceptance/perception of drinking water quality.

While testing was performed under standard laboratory conditions, actual performance may vary. The contaminants or other substances removed or reduced by this water treatment device are not necessarily in all users’ water. Filter performance may vary based on local water conditions.

The Brita Hub™ filter is not intended to purify water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Individuals requiring water of special microbiological purity should follow the advice of their doctor or local health officials regarding the use and consumption of their tap water and Brita™ filtered water.

Capacity: 120 gallons(545 L)

Service Flow Rate: Up to 0.5 gpm(Up to 1.89 L/min)

Working Pressures: 15-70 psi(104-483 kPa)

Operating Temperature: Min 33°F, Max 90°F(1-38°C)

Electrical Requirements: 29 Watts

Please refer elsewhere in this User’s Guide for the proper installation, conditioning, use and care requirements, and an explanation of how the filter replacement indicator functions. Maintenance according to the manufacturer’s instructions is essential for proper filter performance. Replace the Brita Hub™ filter(Model #CT01) every 120 gallons/545 liters (about every 6 months for the average family). If a decrease in flow rate is noticed, replace the filter earlier.

We offer a 30-day, unconditional, 100% money-back guarantee on all Brita™ Pitchers, Faucet Filter Systems, Water Bottles and Filters. Call 1-800-863-3975 (US) or 1-800-387-6940 (Canada). For Brita Hub™ System warranty information, view the User Guide.

The Brita Hub™ Filter (Model #CT01)has been certified by WQA against NSF/ANSI Standards 42, 53 and 401 for the reduction of contaminants in system models as specified on the Performance Data Sheet.

The Brita Hub™ Filter (Model #CT01)has been certified by IAPMO against NSF/ANSI Standard 53 for the reduction of contaminants in system models as specified on the Performance Data Sheet.

Distributed in U.S.A. for: Brita LP, 1221 Broadway, Oakland, CA 94612; 1-800-242-7482

Distributed in Canada by: Brita Canada Corporation, 150 Biscayne Crescent, Brampton, ON L6W 4V3; 1-800-387-6940

View PDF